Download 60 second binary options strategies system

MAME 0.222

MAME 0.222

MAME 0.222, the product of our May/June development cycle, is ready today, and it’s a very exciting release. There are lots of bug fixes, including some long-standing issues with classics like Bosconian and Gaplus, and missing pan/zoom effects in games on Seta hardware. Two more Nintendo LCD games are supported: the Panorama Screen version of Popeye, and the two-player Donkey Kong 3 Micro Vs. System. New versions of supported games include a review copy of DonPachi that allows the game to be paused for photography, and a version of the adult Qix game Gals Panic for the Taiwanese market.
Other advancements on the arcade side include audio circuitry emulation for 280-ZZZAP, and protection microcontroller emulation for Kick and Run and Captain Silver.
The GRiD Compass series were possibly the first rugged computers in the clamshell form factor, possibly best known for their use on NASA space shuttle missions in the 1980s. The initial model, the Compass 1101, is now usable in MAME. There are lots of improvements to the Tandy Color Computer drivers in this release, with better cartridge support being a theme. Acorn BBC series drivers now support Solidisk file system ROMs. Writing to IMD floppy images (popular for CP/M computers) is now supported, and a critical bug affecting writes to HFE disk images has been fixed. Software list additions include a collection of CDs for the SGI MIPS workstations.
There are several updates to Apple II emulation this month, including support for several accelerators, a new IWM floppy controller core, and support for using two memory cards simultaneously on the CFFA2. As usual, we’ve added the latest original software dumps and clean cracks to the software lists, including lots of educational titles.
Finally, the memory system has been optimised, yielding performance improvements in all emulated systems, you no longer need to avoid non-ASCII characters in paths when using the chdman tool, and jedutil supports more devices.
There were too many HyperScan RFID cards added to the software list to itemise them all here. You can read about all the updates in the whatsnew.txt file, or get the source and 64-bit Windows binary packages from the download page.

MAME Testers Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

submitted by cuavas to emulation [link] [comments]

MAME 0.222

MAME 0.222

MAME 0.222, the product of our May/June development cycle, is ready today, and it’s a very exciting release. There are lots of bug fixes, including some long-standing issues with classics like Bosconian and Gaplus, and missing pan/zoom effects in games on Seta hardware. Two more Nintendo LCD games are supported: the Panorama Screen version of Popeye, and the two-player Donkey Kong 3 Micro Vs. System. New versions of supported games include a review copy of DonPachi that allows the game to be paused for photography, and a version of the adult Qix game Gals Panic for the Taiwanese market.
Other advancements on the arcade side include audio circuitry emulation for 280-ZZZAP, and protection microcontroller emulation for Kick and Run and Captain Silver.
The GRiD Compass series were possibly the first rugged computers in the clamshell form factor, possibly best known for their use on NASA space shuttle missions in the 1980s. The initial model, the Compass 1101, is now usable in MAME. There are lots of improvements to the Tandy Color Computer drivers in this release, with better cartridge support being a theme. Acorn BBC series drivers now support Solidisk file system ROMs. Writing to IMD floppy images (popular for CP/M computers) is now supported, and a critical bug affecting writes to HFE disk images has been fixed. Software list additions include a collection of CDs for the SGI MIPS workstations.
There are several updates to Apple II emulation this month, including support for several accelerators, a new IWM floppy controller core, and support for using two memory cards simultaneously on the CFFA2. As usual, we’ve added the latest original software dumps and clean cracks to the software lists, including lots of educational titles.
Finally, the memory system has been optimised, yielding performance improvements in all emulated systems, you no longer need to avoid non-ASCII characters in paths when using the chdman tool, and jedutil supports more devices.
There were too many HyperScan RFID cards added to the software list to itemise them all here. You can read about all the updates in the whatsnew.txt file, or get the source and 64-bit Windows binary packages from the download page.

MAME Testers Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

submitted by cuavas to MAME [link] [comments]

CRTPi-RCA NTSC+PAL v3.0F - America & Europe Unite!

CRTPi Project Presents:

CRTPi-RCA v3.0F

A CRTPi image for running 240p via 3.5mm Composite
Other Releases:
Changelog: v3.0F for RCA 5/11/2020
Changelog: v2.0F for RCA 4/1/2020
Changelog: v1.1FX 12/20/2019
Changelog: v1.0F Hotfix 10/31/2019
Changelog: v1.0F 10/29/2019
Changelog: v0.4 10/22/2019
Changelog: v0.3 10/2/2019
What Does That Look Like?
Here are some examples of games being played in beautiful 240p on CRT sets using the RCA Image!.
What is Different?
  • Retropie 4.6 (build 72132587 commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • 4GB (3872256 KB Uncompressed Image) (Compressed via WinRAR to 886769NTSC/868059PAL KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Heavily modified Sakitoshi CRT-TVout script for switching between 480i and 240p
  • Optional overclock values in /boot/config.txt for Pi2 & Pi3B (disabled by default)
  • NTSC @ 60hz 720/640x480 480i Resolution for Emulationstation & Kodi
  • PAL @ 50hz 720/640x576 576i Resolution for Emulationstation & Kodi
  • NTSC @ 60hz 640x480 Progressive (240 lines) for Retroarch
  • PAL @ 50hz 640x576 Progressive (288 lines) for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Optional 480i mode for PSX and Arcade games
  • Preloaded with free 240p test suites for multiple consoles (PAL SNES & Mega-CD)
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with Kodi 18.2 w/ Convergence Theme @ 480i
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Preloaded with 4:3 Ruckage's runcommand launching screens for supported systems
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Retroarch FCEUmm (NES) Emulator preconfigured for 4:3 horiz/vert overscan crop enabled w/ composite-direct-fbx pallete
  • Retroarch Picodrive (SMS/32X) Emulator preconfigured for 4:3 with 2.5X Sega Mastersystem & 1X Sega 32X resolution
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (Special 1 Pallete) mode with 2x integer scale SGB Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with 2x integer scale GBP Overlay
  • Other Retroarch handheld emulators preset for optimized wide display with overlay
  • Emulationstation preloaded with KALEL1981's Super-Retroboy theme (default)
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini and nes-mini themes configured for 4:3
  • Emulationstation preloaded with PietDAmore's 240p Honey and Bubblegum themes
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
Runahead Tested ~60FPS Stable:
  • Game Gear
  • Game Boy
  • Game Boy Color
  • Game Boy Advance
  • Master System
  • Megadrive
  • NES
  • PC Engine
  • PCE-CD
  • Sega 32X
  • Sega CD
  • SNES
Runahead Tested < 50FPS Unstable:
  • FB Neo
  • FB Alpha
  • Mame
  • N64
  • PlayStation
  • PSP
Runahead Untested:
  • Atari 800
  • Atari 2600
  • Atari 5200
  • Atari 7800
  • Atari Lynx
  • Coleco
  • Intellivision
  • MSX
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copywritten games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-RCA NTSC v3.0F: For Raspberry Pi3B Composite-Out @ 60hz
MD5: 438d69a38b6085d2c5be30fbd43e2b43 
CRTPi-RCA PAL v3.0F: For Raspberry Pi3B Composite-Out @ 50hz
MD5: 5f76241b4ba75e95b597642cea8eb242 
How do I install the Arcade Configuration Pack?
These are the resolution-correct preset arcade configs for MAME/FBA including vertical games. There is roughly 38K files in there, spread out across several systems (arcade, fba, mame-libretro, and neogeo). Having these pre-installed would not allow either image to fit on the SD card used, and may not be needed for everyone. It's a fairly simple process that won't take more than a few minutes of your time.
  • Drop to shell or connect via SSH, and navigate to root (cd /)
  • Download the CRTPi-RCA_ArcadePack.zip with the command:
    sudo wget https://github.com/crtpi/CRTPi-Project/raw/masteCRTPi-RCA_ArcadePack.zip
  • Unzip and overwrite files with the command:
    sudo unzip -o -q CRTPi-RCA_ArcadePack.zip
  • Remove the zip with the command
    sudo rm CRTPi-RCA_ArcadePack.zip
  • Restore read/write access to the files you have overwritten with the command:
    sudo chmod a+rw -R /opt/retropie/configs/
How can I take full advantage of the 480i/240p Switching?
To force 480i for a system or game, you can create a '480i.txt' file inside the configuration folder of the system with a list of the file names (case insensitive, extension optional but recommended) you want to force.
If you wish to force 480i for a whole system, you can write "all" inside the '480i.txt' file.
Alternatively you can create a "240p.txt" file to force 480i to all games except for the ones inside the list.
You can read more about the script functionality here.
Example:
/opt/retropie/configs/psx/480i.txt containing "Bloody Roar 2.PBP" to force 480i for the file "Bloody Roar 2.PBP" /opt/retropie/configs/psx/480i.txt containing "all" to force 480i for all the PlayStation games. /opt/retropie/configs/ports/kodi/480i.txt containing "all" to force 480i on Kodi. 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
I want to switch back to lr-mupen64plus!
  • When launching an n64 game, mash buttons on the controller until the runcommand window comes up.
  • Select on "1 Set default emulator for n64" and choose "lr-mupen64plus"
  • Then "Q Exit (without launching)"
  • Launch the game again -- it will launch in the chosen emulator at the proper resolution
What A/V cable should I use for 3.5mm Composite?
I recommend the Zune A/V cable or XBOX 360E cable, you can find them on eBay and Amazon.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-480p v3.0X - An unholy bastard for Pi3 && Pi4!

CRTPi Project Presents:

CRTPi-480p v3.0X && v3.4X

A CRTPi image for running 480p via HDMI or VGA!
Other Releases:
Changelog: v3.0X && v3.4X for HDMI&VGA666 05/25/2020
Required Hardware:
What is this?
I finally did something for people who don't want to use expensive video hats and SDTV's! This image boots in your choise of CEA 480p or various 640x480p VGA modes. Using Snap-Shader and Simple-Bilinear-Scanlines, I've given a way to upscale 240p content to 480p, while still looking and performing console-fresh! The perfect image for EDTV, HiScan sets, mulit-scan monitors, GSB arcade boards -- this even works on HDTV's that don't upscale 480p content!!
That said, I hate it and it should burn in hell... Enjoy!
What Does That Look Like?
Here's a bunch of pics I took, some better than others!
What is Different?
See the current changelog and the v3.0 thread for a complete list.
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What is Snap-Shader?
It's a Retroarch GSL shader that ensures games on CRT will look as good as on original hardware. It Makes games crisp vertically, and not shimmer horizontally. It correctly aligns the games for you regardless of console. Virtually eliminates the need for separate configurations per core (console).
https://github.com/ektgit/snap-shader-240p
Snap Shader (especially the snap-basic) is super useful on consoles where you may have a mix of horizontal resolutions within the core that you don't necessarily want to set individual game configs for, which for this build, is basically everything but Megadrive, GBA, GBC, Doom, and Quake.
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-480p v3.0X: For Pi3B/B+ with HDMI or VGA666 LIVE @ NOW
MD5: 9ad75efe8516ab0e7f2df3b084e93dcd 
CRTPi-480p v3.4X: For Pi4B with HDMI or VGA666 LIVE @ 16:40PST
MD5: 7272a6ac24fa5004a1f6c961264b2d7d 
How do I set this up?
Edit the /boot/config.txt before first boot.
If you're using an HDMI to converter, select one HDMI block of your preference by uncommenting it and commenting out the rest. The default is HDMI CEA 480p.
If you're using a VGA666, uncomment this block, and then one VGA666 block of your choice.
\## VGA666 - DPI Settings \#dtoverlay=vga666 \#enable_dpi_lcd=1 \#display_default_lcd=1 
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
The GBA/GBC/GB overlay is cropped on my !!!
Go into the Retroarch menu in game and navigate to "Quick Menu > On-Screen Overlay". Click "Overlay Preset" and choose the VGA version instead of the 480p version -- "crt_gbaplayer..." is for GBA and "crt_supergameboy..." is for GB/GBC.
I have X Issue! Help?
Chrono Cross (or Bloody Roar II) or some other PSX game has weird thick-as-fuck scanlines!
Disable the scanline shader, leaving Snap-Basic in place. Chances are you're playing a 480i game that wasn't intended to have scanlines, and the shader can't clamp to the right frames.
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
GBA, PSX, Neo-Geo, Sega-CD, PCE-CD, etc. games don't work!
I haven't included any bios's that didn't come with the retropie stock image, so you'll need to install the appropriate files in the BIOS folder. For Neo-Geo, I highly recommend the UniBios (renamed to neogeo.zip).
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi-VGA v3.0V - Find that VGA Monitor Yet?!

CRTPi Project Presents:

CRTPi-VGA v3.0V

A CRTPi image for running 240p on VGA CRT monitors
Other Releases:
Changelog: v3.0V for VGA-666 05/12/2020
Changelog: v2.5V for VGA-666 05/05/2020
Changelog: v2.0VX for VGA-666 03/21/2020
Required Hardware:
What is this?
Since I've been relegated to working from home for the next forever, I needed something to pass the time. Lots of users have asked for, and worked with me to create a solution for what we'll call the "Poor Man's BVM." A $5 Gert VGA666 adapter, cheap/free 31khz VGA Monitor, and a Pi packed with roms. What could be a better way to pass the quarantine?
For a long time, there were several stumbling blocks:
I finally stumbled upon some old threads with people listing out some 640x480 hdmi_timings, and that cracked the whole case wide open. I finally had the missing piece that could be slotted into my existing images. The end result is Emulationstation and other non-libretro emulators launching in 640x480p @ 65hz (great for PSP, DOSbox, ScummVM, and Kodi!) and all Retroarch emulators launching in 2048x240p or 1920x240p @ 120hz.
I opted to steer away from Black Frame Insertion and instead change the VSync Swap interval to 2 (running the framerate at half of 120hz). This solves the intermittent flicker and also the reduced gamma from BFI. Overall, it's a much more pleasing experience IMO. You can always change VSync Interval back to 1, and enable BFI in Retroarch if you the other way is better.
What Does That Look Like?
Here's a bunch of pics I took, some better than others!
What is Different?
See the current changelog and the v3.0 thread for a complete list.
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
To disable runahead for a game (or emulator):
Quick Menu > Latency > Run-Ahead to Reduce Latency > OFF 
What is Snap-Shader?
It's a Retroarch GSL shader that ensures games on CRT will look as good as on original hardware. It Makes games crisp vertically, and not shimmer horizontally. It correctly aligns the games for you regardless of console. Virtually eliminates the need for separate configurations per core (console).
https://github.com/ektgit/snap-shader-240p
Snap Shader (especially the snap-basic) is super useful on consoles where you may have a mix of horizontal resolutions within the core that you don't necessarily want to set individual game configs for. This is especially useful in PSX, FDS, PCE/PCE-CD, 32X, and MAME.
So far, the image is only set up for Snap-Basic (Pass: 1, Filter: Nearest, Scale: Don't Care) on lr-PCSX-ReARMed. If you care to, I would definitely try it out on other emulators. Here's the enable process:
  • Quick Menu > Shaders
  • Video Shaders > On
  • Shader Passes > 1
  • Shader #0 > snap-basic.glsl
  • Shader #0 Filter > Nearest
  • Shader #0 Scale > Don't Care
  • Save > Save Core Preset
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copy-written games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Google Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi-VGA v3.0V: For Pi3B/B+ with VGA666
MD5: 828cf4e5b67f67e8b5bd1e4fb8477332 
Default Retroarch Keyboard Hotkeys
*SPACE: Enable Hotkey* F1 Menu F2 FF Toggle F3 Reset F4 Cheat Toggle F5 Save State F6 Load State F7 Change State - F8 Change State + F9 Screenshot F10 Mute ENTER: Exit 
I have X Issue! Help?
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
GBA, PSX, Neo-Geo, Sega-CD, PCE-CD, etc. games don't work!
I haven't included any bios's that didn't come with the retropie stock image, so you'll need to install the appropriate files in the BIOS folder. For Neo-Geo, I highly recommend the UniBios (renamed to neogeo.zip).
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
Timings for Boot and Runcommand
640 x 480p @ 65hz Timings: Emulationstation, DOSBox, ScummVM, etc.
640 1 56 56 80 480 0 1 3 25 0 0 0 65 0 36000000 1 #640x480 VGA666 
1280 x 720p @ 60hz Timings: Kodi
1280 1 80 72 216 720 1 5 3 22 0 0 0 60 0 74239049 1 #1280x720p 
Integer Scale Super-Resolution 240p @ 120hz Timings: All Retroarch Emulators
2048 1 180 202 300 240 1 3 5 14 0 0 0 120 0 85909090 1 #256x240/224p 1920 1 167 247 265 240 1 3 7 12 0 0 0 120 0 81720000‬ 1 #320x240/224p 1600 1 95 157 182 240 1 4 3 15 0 0 0 120 0 64000000‬ 1 #320x240/224p Alternate 
Integer Scale Super-Resolution 480p @ 60hz Timings: Dreamcast and PSP Retroarch Emulators
2048 1 180 202 300 480 1 6 10 28 0 0 0 60 0 85909090 1 #320/256x480/448p 
submitted by ErantyInt to u/ErantyInt [link] [comments]

CRTPi4-RCA v3.4FX - Composite TV-Out for your Pi4!

CRTPi Project Presents:

CRTPi4-RCA v3.4FX

A CRTPi image for running 240p via 3.5mm Composite on the Raspberry Pi4
Other Releases:
Changelog: v3.4FX for RCA (PAL Only) 5/18/2020
Changelog: v3.4FX for RCA (NTSC&&PAL) 5/17/2020
Changelog: v3.0F for RCA 5/11/2020
Changelog: v2.0F for RCA 4/1/2020
Changelog: v1.1FX 12/20/2019
Changelog: v1.0F Hotfix 10/31/2019
Changelog: v1.0F 10/29/2019
Changelog: v0.4 10/22/2019
Changelog: v0.3 10/2/2019
How does this even work!?
The amazing u/b0xspread has found a way to enforce modeswitching by watching the logs and processes, and continuing to enforce our desired mode long after the system wants to revert back. We're both expanding this scripting further to hopefully solve the same issues on the RGB and VGA forks -- but progress is slow due to the complex and varied nature of available resolution modes on those builds. But for now, let's just call this "black magic."
What Does That Look Like?
Here are some examples of games being played in beautiful 240p on CRT sets using the RCA Image!.
What is Different?
  • Retropie 4.6 (build 72132587 commit 05/07/20 Buster 10)
  • Retroarch 1.8.5
  • Full Apt-Upgrade for newest firmware and app dependancies (Recommended to repeat this function on your own Pi4)
  • 4GB (3872256 KB Uncompressed Image) (Compressed via WinRAR to 1043540KB)
  • SSH, Samba Share, and USB Rom Service enabled by default
  • Heavily modified Sakitoshi CRT-TVout script for switching between 480i and 240p
  • Further modified Sakitoshi script by u/b0xspread to allow video resolution switching on Pi4 Architecture
  • Optional overclock values in /boot/config.txt for Pi4 (disabled by default) [RECOMMENDED!]
  • NTSC @ 60hz 720/640x480 480i Resolution for Emulationstation & Kodi
  • PAL @ 50hz 720/640x576 576i Resolution for Emulationstation & Kodi
  • NTSC @ 60hz 640x480 Progressive (240 lines) for Retroarch
  • PAL @ 50hz 640x576 Progressive (288 lines) for Retroarch
  • Per-system custom refresh rates for Retroarch
  • Single-frame Run Ahead enabled for many 8-bit & 16-bit consoles and handhelds for Retroarch
  • Optional 480i mode for PSX and Arcade games
  • Preloaded with free 240p test suites for multiple consoles
  • Preloaded with additional stable (opt) Retroarch emulators
  • Preloaded with DOSBox and ScummVM
  • Preloaded with various 4:3 splashscreens from the RPiF download
  • Preloaded with 4:3 Ruckage's runcommand launching screens for supported systems
  • Custom 4:3 Arcade DOJ "Winners DO Use Drugs" splash screen.
  • Preloaded with MUNT Roland MT-32 MIDI emulation for DOSBox/ScummVM
  • Retroarch FCEUmm (NES) Emulator preconfigured for 4:3 horiz/vert overscan crop enabled w/ composite-direct-fbx pallete
  • Retroarch Picodrive (SMS/32X) Emulator preconfigured for 4:3 with 1X Sega Mastersystem & 1X Sega 32X resolution
  • Retroarch Gambatte (GB/GBC) emulator preset to Super Game Boy (Special 1 Pallete) mode with 2x integer scale SGB Overlay
  • Retroarch mGBA (GBA) emulator preset to Game Boy Player mode with 2x integer scale GBP Overlay
  • Other Retroarch handheld emulators preset for optimized wide display with overlay
  • Emulationstation preloaded with Ruckage's RetroPie menu icons
  • Emulationstation preloaded with Ruckage's snes-mini theme configured for 4:3
  • Custom ScummVM system artwork for snes-mini theme
  • Emulationstation systems ordered chronologically instead of alphabetically
  • Emulationstation preconfigured with best settings for analog A/V including best settings for video preview screensavers
What is Run-Ahead?
The Run Ahead feature calculates the frames as fast as possible in the background to "rollback" the action as close as possible to the input command requested.
I've enabled run-ahead on most of the 8 & 16-bit consoles and handhelds. A single frame (and using the second instance) is saved here, which dramatically improves input lag without affecting performance on a Pi3B+. More frames would require more hardware power, and may be achievable via overclocking.
lr-snes9x2010 consistent 60.0-60.2 FPS @ 60.098801hz lr-fceumm consistent 60.0-60.2 FPS @ 60.098801hz lr-beetle-pce-fast consistent 60.1-60.2 @ 60.000000hz lr-genesis-gx-plus consistent 59.9-60.2 FPS @ 59.922741hz (both genesis and sega cd) lr-picodrive consistent 59.9-60.2 FPS @ 59.922741hz (master system, game gear, and 32X) lr-gambatte consistent 60.0-60.2 FPS @ 60.098801hz (SGB2 framerate) lr-mgba consistent 59.8-60.4 FPS @ 60.002220hz (Gamecube framerate) 
Runahead Tested ~60FPS Stable:
  • Game Gear
  • Game Boy
  • Game Boy Color
  • Game Boy Advance
  • Master System
  • Megadrive
  • NES
  • PC Engine
  • PCE-CD
  • Sega 32X
  • Sega CD
  • SNES
Runahead Tested < 50FPS Unstable:
  • FB Neo
  • FB Alpha
  • Mame
  • N64
  • PlayStation
  • PSP
Runahead Untested:
  • Atari 800
  • Atari 2600
  • Atari 5200
  • Atari 7800
  • Atari Lynx
  • Coleco
  • Intellivision
  • MSX
What Does This NOT Have?
This doesn't have any ROMs (other than freeware test suites), BIOS files, music, screenshots, metadata, or videos concerning copywritten games. Other than the configurations and overlays, it has nothing that can't be downloaded through the repository or freeware.
Where Can I Get It?
You can download a premade image from Drive:
NOTE: Please expand your file system via Raspi-Config after your first boot, and reboot!
CRTPi4-RCA NTSC v3.4F: For Raspberry Pi4 Composite-Out @ 60hz
MD5: 7df8453c2e8029b06def7864351ec768 
CRTPi4-RCA PAL-D v3.4F: For Raspberry Pi4 Composite-Out @ 50hz
MD5: ab2bd6ab228bd6f58a22de15044fb46a 
How do I install the Arcade Configuration Pack?
These are the resolution-correct preset arcade configs for MAME/FBA including vertical games. There is roughly 38K files in there, spread out across several systems (arcade, fba, mame-libretro, and neogeo). Having these pre-installed would not allow either image to fit on the SD card used, and may not be needed for everyone. It's a fairly simple process that won't take more than a few minutes of your time.
  • Drop to shell or connect via SSH, and navigate to root (cd /)
  • Download the CRTPi-RCA_ArcadePack.zip with the command:
    sudo wget https://github.com/crtpi/CRTPi-Project/raw/masteCRTPi-RCA_ArcadePack.zip
  • Unzip and overwrite files with the command:
    sudo unzip -o -q CRTPi-RCA_ArcadePack.zip
  • Remove the zip with the command
    sudo rm CRTPi-RCA_ArcadePack.zip
  • Restore read/write access to the files you have overwritten with the command:
    sudo chmod a+rw -R /opt/retropie/configs/
How can I take full advantage of the 480i/240p Switching?
To force 480i for a system or game, you can create a '480i.txt' file inside the configuration folder of the system with a list of the file names (case insensitive, extension optional but recommended) you want to force.
If you wish to force 480i for a whole system, you can write "all" inside the '480i.txt' file.
Alternatively you can create a "240p.txt" file to force 480i to all games except for the ones inside the list.
You can read more about the script functionality here.
Example:
/opt/retropie/configs/psx/480i.txt containing "Bloody Roar 2.PBP" to force 480i for the file "Bloody Roar 2.PBP" /opt/retropie/configs/psx/480i.txt containing "all" to force 480i for all the PlayStation games. /opt/retropie/configs/ports/kodi/480i.txt containing "all" to force 480i on Kodi. 
I have X Issue! Help?
Why isn't there a Pi4 PAL version?
Try as I might, I have been unable to get a PAL signal out of the SDTV port on a Pi4. My BVM displays PAL-S and PAL-D fine, but neither will get anything but static. I don't even get a rolling B&W image, just horrible static. If you figure out a way, let me know!
I only have like 500mb of free space on my XXgb SD card!
You need to expand your file system via Raspi-Config. Follow these steps.
I want to switch back to lr-mupen64plus!
  • When launching an n64 game, mash buttons on the controller until the runcommand window comes up.
  • Select on "1 Set default emulator for n64" and choose "lr-mupen64plus"
  • Then "Q Exit (without launching)"
  • Launch the game again -- it will launch in the chosen emulator at the proper resolution
What A/V cable should I use for 3.5mm Composite?
I recommend the Zune A/V cable or XBOX 360E cable, you can find them on eBay and Amazon.
Samba Share won't work after I set up Wi-Fi!
Samba share service starts on boot, pending that a network is available. Configure your Wi-Fi then reboot first, and if that doesn't fix it then go into Retropie Setup > Configuration/Tools > Samba > Install Samba. Once it's complete, reboot and it should be golden.
USB-Romservice and/or Retropie-Mount don't work!
Follow this guide, but follow these steps before plugging in your thumb drive:
  • Go to Retropie-Setup
  • Update retropie install script
  • Go to Manage Packages -> Optional Packages
  • Scroll all the way down to usbromservice
  • Uninstall usbromservice
  • Install it again from Binary
  • Once finished, choose Configuration, then Enable USB Romservice
  • Reboot, and wait for it to fully boot in to ES
  • Plug in USB stick (has to be FAT32) and WAIT A LONG TIME (if your stick has a light, wait for it to stop flashing)
submitted by ErantyInt to u/ErantyInt [link] [comments]

Unable to connect to multiplayer servers

I've been having this bug for a while now and seen other players with it too but no proper solution.
I cannot connect to multiplayer servers. The game downloads about 2MB of the map and then the connection drops. This seems to be all servers that are headless, modded and unmodded. If I join a player hosted game it works fine.
I have reinstalled Factorio, including appdata. No joy. Disabled firewall no joy. Although firewall does not make sense since it would just block the connection outright.
We found a workaround of limiting the download speed to 512kbps, which is less than 1/10th of the upload speed the server is capable of. This prevents being dropped but it makes the map take a good 5 min to download and then another 5 min to catch up, most players have stopped playing with this since its not worth waiting 10 min to play. This is in a early to mid game map. It isnt even that big yet. This isnt a practical solution.
I would appreciate any help anyone can give to solve this. theres one of my debug logs included below.
0.001 2020-06-25 12:48:09; Factorio 0.18.33 (build 52856, win64, steam) 0.002 Operating system: Windows 10 (version 2004) 0.002 Program arguments: "C:\Program Files (x86)\Steam\steamapps\common\Factorio\bin\x64\Factorio.exe" "--wait-to-close" "5700" "--mp-connect" "xxx.xxx.xxx.xxx:34197" 0.002 Read data path: C:/Program Files (x86)/Steam/steamapps/common/Factorio/data 0.002 Write data path: C:/Users/BigMonD/AppData/Roaming/Factorio [116637/226357MB] 0.002 Binaries path: C:/Program Files (x86)/Steam/steamapps/common/Factorio/bin 0.013 System info: [CPU: AMD FX(tm)-8350 Eight-Core Processor, 8 cores, RAM: 6324/16121 MB, page: 7954/35449 MB, virtual: 4327/134217727 MB, extended virtual: 0 MB] 0.015 Display options: [FullScreen: 1] [VSync: 1] [UIScale: automatic (100.0%)] [Native DPI: 1] [Screen: 255] [Special: lmw] [Lang: en] 0.027 Available displays: 2 0.028 [1]: \\.\DISPLAY2 - NVIDIA GeForce GTX 1060 3GB {0x05, [0,0], 1920x1080, 32bit, 60Hz} 0.028 [0]: \\.\DISPLAY1 - NVIDIA GeForce GTX 1060 3GB {0x01, [-1920,0], 1920x1080, 32bit, 60Hz} 0.202 [Direct3D11] Display: 0, Output: 0, DisplayAdapter: 0, RenderingAdapter: 0; d3dcompiler_47.dll 0.204 Verbose GraphicsInterfaceDX11.cpp:263: DXGI 1.5 detected, Allow tearing is supported 0.207 Adapter [0]: NVIDIA GeForce GTX 1060 3GB {10de-1c02} (26.21.14.4614) 0.212 Adapter [1]: Microsoft Basic Render Driver {1414-8c} (10.0.19041.84) 0.510 Initialised Direct3D[0]: NVIDIA GeForce GTX 1060 3GB; id: 10de-1c02; driver: nvldumdx.dll 26.21.14.4614 0.510 D3D Feature Level: 11.1, DXGI 1.5+, SwapChain: 3,flip-discard,-,-,-,none 0.511 [Local Video Memory] Budget: 2539MB, CurrentUsage: 2MB, Reservation: 0/1344MB 0.511 [Non-Local Vid.Mem.] Budget: 7401MB, CurrentUsage: 0MB, Reservation: 0/3828MB 0.511 Tiled resources: Tier 2 0.511 Unified Memory Architecture: No 0.511 BGR 565 Supported: Yes 0.511 MaximumFrameLatency: 3, GPUThreadPriority: 0 0.511 Graphics settings preset: very-high 0.511 Dedicated video memory size 2988 MB 0.577 Verbose PipelineStateObject.cpp:85: Time to load shaders: 0.064782 seconds. 0.586 Desktop composition is active. 0.587 Graphics options: [Graphics quality: high] [Video memory usage: all] [Light scale: 25%] [DXT: high-quality] [Color: 32bit] 0.587 [Max threads (load/render): 32/8] [Max texture size: 0] [Tex.Stream.: 0] [Rotation quality: normal] [Other: STDCWT] [B:0,C:0,S:100] 0.737 DSound: Starting _dsound_update thread 0.737 DSound: Enter _dsound_update; tid=1316 0.932 Info ModManager.cpp:253: Found duplicate mod aai-industry, using higher version (0.4.14 > 0.4.13). 1.071 Info ModManager.cpp:253: Found duplicate mod DeathMarkers, using higher version (0.3.1 > 0.3.0). 1.214 Info ModManager.cpp:253: Found duplicate mod space-exploration, using higher version (0.3.81 > 0.3.77). 1.250 Info ModManager.cpp:253: Found duplicate mod space-exploration, using higher version (0.3.82 > 0.3.81). 1.276 Info ModManager.cpp:253: Found duplicate mod space-exploration, using higher version (0.3.84 > 0.3.82). 1.387 Verbose PipelineStateObject.cpp:77: Time to load shaders in background: 0.810396 seconds. 1.423 Info ModManager.cpp:253: Found duplicate mod space-exploration-postprocess, using higher version (0.3.19 > 0.3.18). 1.431 Info ModManager.cpp:253: Found duplicate mod space-exploration-postprocess, using higher version (0.3.20 > 0.3.19). 1.494 Info ModManager.cpp:253: Found duplicate mod train-pubsub, using higher version (0.6.19 > 0.6.18). 1.505 Loading mod core 0.0.0 (data.lua) 1.802 Loading mod base 0.18.33 (data.lua) 2.656 Loading mod base 0.18.33 (data-updates.lua) 3.031 Checksum for core: 2231353392 3.031 Checksum of base: 2870976430 3.474 Prototype list checksum: 156825909 3.478 Verbose ModManager.cpp:554: Time to load mods: 2.5774 3.601 Loading sounds... 3.975 Info PlayerData.cpp:70: Local player-data.json unavailable 3.975 Info PlayerData.cpp:73: Cloud player-data.json available, timestamp 1593013512 4.274 Crop bitmaps. 4.493 Parallel Sprite Loader initialized (threads: 7) 4.784 Initial atlas bitmap size is 16384 4.869 Created atlas bitmap 16384x16368 [none] 4.878 Created atlas bitmap 16384x11428 [none] 4.879 Created atlas bitmap 8192x3736 [decal] 4.882 Created atlas bitmap 16384x5248 [low-object, linear-minification] 4.883 Created atlas bitmap 8192x3760 [mipmap, linear-minification, linear-magnification, linear-mip-level] 4.884 Created atlas bitmap 16384x5776 [terrain, mipmap, linear-minification, linear-mip-level] 4.885 Created atlas bitmap 4096x2848 [terrain-effect-map, mipmap, linear-minification, linear-mip-level] 4.885 Created atlas bitmap 4096x1600 [smoke, mipmap, linear-minification, linear-magnification] 4.886 Created atlas bitmap 4096x3104 [mipmap] 4.887 Created atlas bitmap 4096x2144 [icon, not-compressed, mipmap, linear-minification, linear-magnification, linear-mip-level] 4.888 Created atlas bitmap 2048x192 [icon-background, not-compressed, mipmap, linear-minification, linear-magnification, linear-mip-level, ] 4.888 Created atlas bitmap 4096x2652 [alpha-mask] 4.897 Created atlas bitmap 16384x14748 [shadow, linear-magnification, alpha-mask] 4.898 Created atlas bitmap 8192x2352 [shadow, mipmap, linear-magnification, alpha-mask] 4.905 Verbose TextureProcessor.cpp:1140: GPU accelerated compression test: Time 7.346 ms; YCoCg_DXT PSNR: 35.83, BC3 PSNR: 33.82 4.905 Texture processor created (2048). GPU accelerated compression Supported: yes, Enabled: yes/yes. Test passed. YCoCgDXT PSNR: 35.83, BC3 PSNR: 33.82 6.406 Parallel Sprite Loader initialized (threads: 7) 21.362 Sprites loaded 21.376 Generated mipmaps (4) for atlas [3] of size 16384x5248 21.387 Generated mipmaps (3) for atlas [4] of size 8192x3760 21.399 Generated mipmaps (3) for atlas [5] of size 16384x5776 21.410 Generated mipmaps (3) for atlas [6] of size 4096x2848 21.421 Generated mipmaps (3) for atlas [7] of size 4096x1600 21.469 Generated mipmaps (3) for atlas [8] of size 4096x3104 21.480 Generated mipmaps (5) for atlas [9] of size 4096x2144 21.492 Generated mipmaps (3) for atlas [13] of size 8192x2352 21.505 Custom mipmaps uploaded. 21.505 Verbose AtlasSystem.cpp:927: Atlas memory size: 1125.37MB; 0.00MB (virtual) 21.505 Verbose AtlasSystem.cpp:928: Size of sprites outside of atlas: 0.13MB 21.609 Factorio initialised 21.612 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 21.612 Info UDPSocket.cpp:33: Opening socket 21.613 Verbose RouterBase.cpp:60: Started router thread. 21.613 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 21.616 Verbose SteamContext.cpp:553: SteamUserStats initialized. 21.851 Connection refused 21.851 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 21.851 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(Disconnected) 21.853 Info HttpSharedState.cpp:54: Downloading https://auth.factorio.com/generate-user-server-key-2?api_version=4 22.348 Info AuthServerConnector.cpp:97: Received key from auth server. 22.349 Verbose RouterBase.cpp:82: Finishing router thread. 22.349 Info UDPSocket.cpp:218: Closing socket 22.349 Info UDPSocket.cpp:248: Socket closed 22.349 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 22.349 Info UDPSocket.cpp:33: Opening socket 22.350 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 22.350 Verbose RouterBase.cpp:60: Started router thread. 22.618 Info ClientSynchronizer.cpp:35: Initialized Synchronizer local peer(1) latency(32). 22.618 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(ConnectedWaitingForMap) 22.618 Info ClientRouter.cpp:221: ConnectionAccepted 23.219 Info ClientMultiplayerManager.cpp:750: Received mapReadyForDownload 23.219 Downloading file C:\Users\BigMonD\AppData\Roaming\Factorio\temp\mp-download.zip (4733908 B, 9412 blocks) 23.222 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedWaitingForMap) to(ConnectedDownloadingMap) 52.952 Error ClientMultiplayerManager.cpp:98: MultiplayerManager failed: "You have been dropped from the game." 52.952 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedDownloadingMap) to(WaitingForUserToSaveOrQuitAfterServerLeft) 52.952 Info ClientMultiplayerManager.cpp:891: Disconnect notification for peer (3) 121.007 Verbose RouterBase.cpp:82: Finishing router thread. 121.008 Info UDPSocket.cpp:218: Closing socket 121.008 Info UDPSocket.cpp:248: Socket closed 121.009 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 121.009 Info UDPSocket.cpp:33: Opening socket 121.009 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 121.009 Verbose RouterBase.cpp:60: Started router thread. 121.253 Info ClientSynchronizer.cpp:35: Initialized Synchronizer local peer(1) latency(32). 121.253 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(ConnectedWaitingForMap) 121.253 Info ClientRouter.cpp:221: ConnectionAccepted 121.653 Info ClientMultiplayerManager.cpp:750: Received mapReadyForDownload 121.653 Downloading file C:\Users\BigMonD\AppData\Roaming\Factorio\temp\mp-download.zip (4733499 B, 9411 blocks) 121.655 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedWaitingForMap) to(ConnectedDownloadingMap) 121.655 Warning ClientMultiplayerManager.cpp:772: receivedScriptChecksums isn't empty when download starting. 147.409 Info ClientMultiplayerManager.cpp:144: Disconnecting multiplayer connection. Reason: Quit. 147.410 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedDownloadingMap) to(DisconnectScheduled) 147.418 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(DisconnectScheduled) to(WaitingForDisconnectConfirmation) 149.018 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(WaitingForDisconnectConfirmation) to(Disconnected) 149.021 Verbose RouterBase.cpp:82: Finishing router thread. 149.022 Info UDPSocket.cpp:218: Closing socket 149.022 Info UDPSocket.cpp:248: Socket closed 158.410 Info UDPSocket.cpp:27: Opening socket at (IP ADDR:({0.0.0.0:0})) 158.411 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-games?username=BigMonD&token=&version=0.18.33&lang=en 159.161 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7628784?version=0.18.33&lang=en 161.943 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625626?version=0.18.33&lang=en 167.056 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625694?version=0.18.33&lang=en 168.675 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625752?version=0.18.33&lang=en 170.179 Info UDPSocket.cpp:218: Closing socket 170.179 Info UDPSocket.cpp:248: Socket closed 170.179 Info UDPSocket.cpp:218: Closing socket 170.179 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 170.179 Info UDPSocket.cpp:33: Opening socket 170.180 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 170.180 Verbose RouterBase.cpp:60: Started router thread. 172.734 Verbose TransmissionControlHelper.cpp:169: Fragment 0000 failed too many times 180.184 Error ClientMultiplayerManager.cpp:98: MultiplayerManager failed: multiplayer.not-received-connection-accept-reply 180.186 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(InitializationFailed) 185.553 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 185.553 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(InitializationFailed) to(Disconnected) 185.555 Verbose RouterBase.cpp:82: Finishing router thread. 185.556 Info UDPSocket.cpp:218: Closing socket 185.556 Info UDPSocket.cpp:248: Socket closed 186.845 Info UDPSocket.cpp:27: Opening socket at (IP ADDR:({0.0.0.0:0})) 186.845 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-games?username=BigMonD&token=&version=0.18.33&lang=en 187.085 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7628784?version=0.18.33&lang=en 189.807 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625516?version=0.18.33&lang=en 190.862 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625811?version=0.18.33&lang=en 192.069 Info UDPSocket.cpp:218: Closing socket 192.069 Info UDPSocket.cpp:248: Socket closed 192.069 Info UDPSocket.cpp:218: Closing socket 192.069 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 192.069 Info UDPSocket.cpp:33: Opening socket 192.070 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 192.070 Verbose RouterBase.cpp:60: Started router thread. 192.284 Connection refused 192.285 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 192.285 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(Disconnected) 192.286 Info HttpSharedState.cpp:54: Downloading https://auth.factorio.com/generate-user-server-key-2?api_version=4 192.770 Info AuthServerConnector.cpp:97: Received key from auth server. 192.770 Verbose RouterBase.cpp:82: Finishing router thread. 192.771 Info UDPSocket.cpp:218: Closing socket 192.771 Info UDPSocket.cpp:248: Socket closed 192.771 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 192.771 Info UDPSocket.cpp:33: Opening socket 192.771 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 192.771 Verbose RouterBase.cpp:60: Started router thread. 193.035 Info ClientSynchronizer.cpp:35: Initialized Synchronizer local peer(1) latency(32). 193.035 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(ConnectedWaitingForMap) 193.035 Info ClientRouter.cpp:221: ConnectionAccepted 197.869 Info ClientMultiplayerManager.cpp:750: Received mapReadyForDownload 197.869 Downloading file C:\Users\BigMonD\AppData\Roaming\Factorio\temp\mp-download.zip (72214722 B, 143569 blocks) 197.891 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedWaitingForMap) to(ConnectedDownloadingMap) 226.334 Warning ClientSynchronizer.cpp:89: nextHeartbeatSequenceNumber(1972842051) server wants a heartbeat(1972841241) that we don't have. 226.651 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedDownloadingMap) to(WaitingForUserToSaveOrQuitAfterServerLeft) 226.919 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353084) outside latency window [2352284, 2353084) 226.919 Info UnparsedNetworkMessage.cpp:102: Message data: 07 01 bc e7 23 00 01 19 2b 97 75 226.952 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353085) outside latency window [2352284, 2353084) 226.952 Info UnparsedNetworkMessage.cpp:102: Message data: 07 10 bd e7 23 00 01 0b f9 01 00 226.985 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353086) outside latency window [2352284, 2353084) 226.985 Info UnparsedNetworkMessage.cpp:102: Message data: 27 00 be e7 23 00 227.019 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353087) outside latency window [2352284, 2353084) 227.019 Info UnparsedNetworkMessage.cpp:102: Message data: 27 00 bf e7 23 00 227.051 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353088) outside latency window [2352284, 2353084) 227.051 Info UnparsedNetworkMessage.cpp:102: Message data: 07 10 c0 e7 23 00 01 0b fa 01 00 227.085 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353089) outside latency window [2352284, 2353084) 227.085 Info UnparsedNetworkMessage.cpp:102: Message data: 07 00 c1 e7 23 00 227.119 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353090) outside latency window [2352284, 2353084) 227.119 Info UnparsedNetworkMessage.cpp:102: Message data: 27 00 c2 e7 23 00 227.168 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353091) outside latency window [2352284, 2353084) 227.168 Info UnparsedNetworkMessage.cpp:102: Message data: 07 10 c3 e7 23 00 01 0b fb 01 00 227.186 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353092) outside latency window [2352284, 2353084) 227.186 Info UnparsedNetworkMessage.cpp:102: Message data: 07 00 c4 e7 23 00 227.218 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353093) outside latency window [2352284, 2353084) 227.218 Info UnparsedNetworkMessage.cpp:102: Message data: 07 00 c5 e7 23 00 227.251 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353094) outside latency window [2352284, 2353084) 227.251 Info UnparsedNetworkMessage.cpp:102: Message data: 07 10 c6 e7 23 00 01 0b fc 01 00 227.285 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353095) outside latency window [2352284, 2353084) 227.285 Info UnparsedNetworkMessage.cpp:102: Message data: 27 00 c7 e7 23 00 227.319 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353096) outside latency window [2352284, 2353084) 227.319 Info UnparsedNetworkMessage.cpp:102: Message data: 07 00 c8 e7 23 00 227.352 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353097) outside latency window [2352284, 2353084) 227.352 Info UnparsedNetworkMessage.cpp:102: Message data: 27 10 c9 e7 23 00 01 0b fd 01 00 227.401 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353098) outside latency window [2352284, 2353084) 227.401 Info UnparsedNetworkMessage.cpp:102: Message data: 07 00 ca e7 23 00 227.434 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353099) outside latency window [2352284, 2353084) 227.434 Info UnparsedNetworkMessage.cpp:102: Message data: 07 10 cb e7 23 00 01 0b fe 01 00 227.468 Info UnparsedNetworkMessage.cpp:91: Invalid packet (type ServerToClientHeartbeat) received from IP ADDR:({xxx.xxx.xxx.xxx:34197}): heartbeat sequence number (2353100) outside latency window [2352284, 2353084) 227.468 Info UnparsedNetworkMessage.cpp:102: Message data: 27 10 cc e7 23 00 01 01 01 01 00 229.340 Verbose RouterBase.cpp:82: Finishing router thread. 229.340 Info UDPSocket.cpp:218: Closing socket 229.340 Info UDPSocket.cpp:248: Socket closed 229.346 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 229.346 Info UDPSocket.cpp:33: Opening socket 229.347 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 229.347 Verbose RouterBase.cpp:60: Started router thread. 231.885 Verbose TransmissionControlHelper.cpp:169: Fragment 0000 failed too many times 239.351 Error ClientMultiplayerManager.cpp:98: MultiplayerManager failed: multiplayer.not-received-connection-accept-reply 239.351 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(InitializationFailed) 241.169 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 241.169 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(InitializationFailed) to(Disconnected) 241.171 Verbose RouterBase.cpp:82: Finishing router thread. 241.172 Info UDPSocket.cpp:218: Closing socket 241.172 Info UDPSocket.cpp:248: Socket closed 242.402 Info UDPSocket.cpp:27: Opening socket at (IP ADDR:({0.0.0.0:0})) 242.403 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-games?username=BigMonD&token=&version=0.18.33&lang=en 242.560 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7628784?version=0.18.33&lang=en 246.131 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625812?version=0.18.33&lang=en 248.291 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625693?version=0.18.33&lang=en 250.542 Info UDPSocket.cpp:218: Closing socket 250.542 Info UDPSocket.cpp:248: Socket closed 250.542 Info UDPSocket.cpp:218: Closing socket 250.542 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 250.542 Info UDPSocket.cpp:33: Opening socket 250.543 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 250.543 Verbose RouterBase.cpp:60: Started router thread. 253.101 Verbose TransmissionControlHelper.cpp:169: Fragment 0000 failed too many times 260.552 Error ClientMultiplayerManager.cpp:98: MultiplayerManager failed: multiplayer.not-received-connection-accept-reply 260.552 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(InitializationFailed) 369.720 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 369.720 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(InitializationFailed) to(Disconnected) 369.721 Verbose RouterBase.cpp:82: Finishing router thread. 369.721 Info UDPSocket.cpp:218: Closing socket 369.721 Info UDPSocket.cpp:248: Socket closed 371.049 Info UDPSocket.cpp:27: Opening socket at (IP ADDR:({0.0.0.0:0})) 371.050 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-games?username=BigMonD&token=&version=0.18.33&lang=en 371.796 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7628784?version=0.18.33&lang=en 375.104 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625583?version=0.18.33&lang=en 378.159 Info UDPSocket.cpp:218: Closing socket 378.159 Info UDPSocket.cpp:248: Socket closed 378.159 Info UDPSocket.cpp:218: Closing socket 378.160 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 378.160 Info UDPSocket.cpp:33: Opening socket 378.160 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 378.161 Verbose RouterBase.cpp:60: Started router thread. 378.234 Connection refused 378.234 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 378.234 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(Disconnected) 378.236 Info HttpSharedState.cpp:54: Downloading https://auth.factorio.com/generate-user-server-key-2?api_version=4 378.727 Info AuthServerConnector.cpp:97: Received key from auth server. 378.728 Verbose RouterBase.cpp:82: Finishing router thread. 378.728 Info UDPSocket.cpp:218: Closing socket 378.728 Info UDPSocket.cpp:248: Socket closed 378.728 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 378.728 Info UDPSocket.cpp:33: Opening socket 378.729 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 378.729 Verbose RouterBase.cpp:60: Started router thread. 379.103 Info ClientSynchronizer.cpp:35: Initialized Synchronizer local peer(1) latency(32). 379.103 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(ConnectedWaitingForMap) 379.103 Info ClientRouter.cpp:221: ConnectionAccepted 379.234 Info ClientMultiplayerManager.cpp:750: Received mapReadyForDownload 379.234 Downloading file C:\Users\BigMonD\AppData\Roaming\Factorio\temp\mp-download.zip (7826785 B, 15561 blocks) 379.237 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedWaitingForMap) to(ConnectedDownloadingMap) 407.768 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(ConnectedDownloadingMap) to(WaitingForUserToSaveOrQuitAfterServerLeft) 410.272 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 410.272 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(WaitingForUserToSaveOrQuitAfterServerLeft) to(Disconnected) 410.274 Verbose RouterBase.cpp:82: Finishing router thread. 410.274 Info UDPSocket.cpp:218: Closing socket 410.274 Info UDPSocket.cpp:248: Socket closed 412.772 Info UDPSocket.cpp:27: Opening socket at (IP ADDR:({0.0.0.0:0})) 412.772 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-games?username=BigMonD&token=&version=0.18.33&lang=en 413.022 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7628784?version=0.18.33&lang=en 416.837 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625693?version=0.18.33&lang=en 418.842 Info HttpSharedState.cpp:54: Downloading https://multiplayer.factorio.com/get-game-details/7625694?version=0.18.33&lang=en 423.632 Info UDPSocket.cpp:218: Closing socket 423.632 Info UDPSocket.cpp:248: Socket closed 423.632 Info UDPSocket.cpp:218: Closing socket 423.633 Joining game IP ADDR:({xxx.xxx.xxx.xxx:34197}) 423.633 Info UDPSocket.cpp:33: Opening socket 423.633 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Ready) to(Connecting) 423.633 Verbose RouterBase.cpp:60: Started router thread. 426.202 Verbose TransmissionControlHelper.cpp:169: Fragment 0000 failed too many times 433.635 Error ClientMultiplayerManager.cpp:98: MultiplayerManager failed: multiplayer.not-received-connection-accept-reply 433.635 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(Connecting) to(InitializationFailed) 435.269 Info ClientMultiplayerManager.cpp:202: Quitting multiplayer connection. 435.269 Info ClientMultiplayerManager.cpp:581: UpdateTick(4294967295) changing state from(InitializationFailed) to(Disconnected) 435.270 Verbose RouterBase.cpp:82: Finishing router thread. 435.270 Info UDPSocket.cpp:218: Closing socket 435.271 Info UDPSocket.cpp:248: Socket closed 
submitted by bigmonmulgrew to factorio [link] [comments]

$7000 In 10 Minutes Trading 60 Second Binary Options Binary Options Signals Indicator 60 Second 90% Accurate Signals! 60 Seconds binary options strategy 99 - 100% Winning (100% profit guaranteed) 60 Second Binary Options Trading : Mastering Binary ALPHA : Recape - Part -1 Binary Options 60 Seconds Indicator %100 Winning Trades

Buy houses a great binary apply page pdf free. These bands can be used to process and analyze any period of time with a high sensitivity for a future price estimation Jul 04, 2020 · This is 60 second 60second dot indicator for binary options binary forex options a Indicator for the MT4 platform to identify possible profitable trades 1-minute 60 second binary options strategies I jumped out of my regular pattern of trading 15-minute expiries in the 5-minute graph in favor of “60-second” binary choices.. For starters, I simply felt like breaking up things somewhat for my own pleasure 60 seconds binary option strategy.I understand that lots of dealers are into this fast-paced choice, as it is currently provided by many overseas Good Day Traders, I’m Kostasze and my first article is about my trading style and some comments in my trades. First of all, I want to say that I am a short- term binary options trader, 1 min and 5 min expiry are both short-term trading.Personally, I prefer trading 1 min expiry with 1min chart.I sometimes use 5min chart to filter some of my entries. I've been testing this binary options system for a while and the results look great. It consists of 2 trading indicators: the 3-bands indicator for options trading and the popular CCI indicator. The image below shows the trading outcome on the 5 min British Pound /US Dollar chart. 8 Wins and 2 losses, that's 80% winning rate. 2016 V kategoriích: 60 second strategies, All Binary Options Strategies GOD strategy is said to be one of the most successful strategies for binary options with one minute (60 seconds) expiration time.

[index] [8474] [30565] [4520] [16887] [6403] [2675] [1744] [22369] [2813] [17459]

$7000 In 10 Minutes Trading 60 Second Binary Options

Template & Indicator Download Ebook Download : ... I think for 60 Second Binary Options trading this will be the best Video tutorial every and all my readers and class member will find useful from ... The Banc De Binary trading platform is certainly among the most intuitive platforms we've tested, with clear tabs that direct traders to specific trading styles (such as 60 second options and One ... In this tutorial I teach how to win 90% of the time with 60 second strategy for binary options. This indicator will also work with all the other time charts. There are 3 rules to follow. Hi Friends I will Show This Video Binary Options 60 Seconds Indicator Signal 99% Winning Live Trading Proof ----- Download : https://goo.gl/Y3pjrf ----- DISCLAIMER: Please Note May note be ... Chaser 1 Minute Template IQ Option REAL Tradings (FREE Download) - Duration: 28:46. ... 60 Seconds binary options strategy 99 - 100% Winning (100% profit guaranteed) ...

Flag Counter