How to Compile Bitcoin Source Code in Ubuntu 16.04 LTS

What is the stable version?

I just compiled bitcoin cash from source, version 0.21.11, and it when I do getblockchaininfo I get the warning:
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
So I tried with 0.21.10, 0.21.9, and even 0.21.8. They all give the same warning!
Here's what I did (on Ubuntu 20.04):
apt-get update
apt-get upgrade -y
apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev git bsdmainutils build-essential libssl-dev libevent-dev ninja-build python3 cmake libjemalloc-dev libminiupnpc-dev libdb-dev libdb++-dev libzmq3-dev -y
git clone https://github.com/Bitcoin-ABC/bitcoin-abc --branch v0.21.11 --single-branch
(cd bitcoin-abc && mkdir build && cd build && cmake -GNinja -DBUILD_BITCOIN_QT=OFF .. && ninja && strip src/bitcoind && strip src/bitcoin-cli && strip src/bitcoin-tx && ninja install)
What am I doing wrong? I am planning on mining so I am concerned by this warning.
submitted by bithire to Bitcoincash [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

How to get Energi Wallet running on Raspberry Pi 4

How to get Energi Wallet running on Raspberry Pi 4
Hello,
I'm new to the Raspberry Pi and trying to get the NRG Core Cryptocurrency wallet running on my Raspberry. Finally I was able to compile the files after this commands:
Download and install the newest updates sudo apt-get update && sudo apt-get upgrade
Install the following major dependencies packages sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
Install the following QT dependencies packages sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
Install bitcoin PPA files cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
Add this line to the file: deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
Close file
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
Clone Github cd git clone https://github.com/energicryptocurrency/energi.git
Install Libdb4.8 Libdb4.8-dev Libdb++ Libdb4.8++-dev
Compile the wallet cd energi ./autogen.sh ./configure --with-boost-libdir=/uslib/arm-linux-gnueabihf make sudo make install
After compiling I see the files in /uslocal/bin
https://preview.redd.it/25m1nm8164k41.jpg?width=2016&format=pjpg&auto=webp&s=3dfec55b307187eea06a279e284a19a6ae5d6d37
No I need to know how to use this files? Can someone help me please?
submitted by FCU4ever to energicryptocurrency [link] [comments]

[IDEA] [PROPOSAL] Monero Debian (deb) packages / Debian package repository deb.getmonero.org (I can do)

I have the skills to implement this if wanted.
Possible User Experience
This is a proposal, i.e. not implemented yet. Instructions for users, simplified.
How to install monero using apt-get
Download the repository signing key.
wget https://www.getmonero.org/monero.asc
Add the signing key.
sudo apt-key --keyring /etc/apt/trusted.gpg.d/monero.gpg add ~/monero.asc
Add APT repository.
echo "deb https://deb.getmonero.org buster main" | sudo tee /etc/apt/sources.list.d/monero.list
Update your package lists.
sudo apt-get update
Install monero.
sudo apt-get install monero
A few technical implementation details
I would simply grab the binaries provided by getmonero.org, download them, check software (gpg) signatures, put these into deb packages, add these to a repository, and upload the repository.
What I would not do is creating the binaries during package creation. While this is nice to have, it doesn't help user experience and blocks the progress on reaching this goal. See next chapter.
Why simply put the pre-build Monero binaries into a deb package?
1) After bitcoin existing for more than 10 years, being popular and being in Debian unstable (sid) it still never made its way into Debian testing, let alone stable. Reason being explained that a difference in underlying libraries (even just security fixes) during compilation may result in a network split. Binaries compiled during packaging on different versions of Linux distributions might have different libraries that might cause a network fork / chain split.
References:
(Note: above website saying Tags: fixed-upstream is probably a mistake as discussion at bottom says.)
2) The github issue of packaging monero stalled.
3) By shipping the same binaries as provided by getmonero.org reduces the chances of introducing a backdoor.
Many Options
Timeline
Doable quickly. The electrum (bitcoin) AppImage was recently added to a Debian package (binaries-freedom) by me and is now easily installable in Whonix. Pre-installed in testers version of Whonix already.
About Me
I am the founder of Whonix, which I am maintaining at present for more than 7 years.
Whonix (formerly TorBOX) is a Debian GNU/Linux–based security-focused Linux distribution. It aims to provide privacy, security and anonymity on the internet.
You can see an overview of packages I am maintaining on my github profile.
To proof that this forum account adrelanos corresponds the same person maintaining whonix.org, it is added here.
Questions
What happened to, what is the successor of the forum funding system?
submitted by adrelanos to Monero [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

How to install any QT-Wallet on the Raspberry Pi / Pi3B+

Hello and welcome to my first tutorial. Today I will show you how to install almost any QT-wallet on the RaspberryPi. I hope this tutorial will help you. I use the BankSocietyCoin in this tutorial, you can change it also to your fav. Coin.

Install Raspbian , *Buster produced a lot of failures on my system while compiling Wallets*
(my version: https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-03-14/ )
Run the following commands:

Change Swap Size of the Rasp:

sudo nano /etc/dphys-swapfile
change to CONF_SWAPSIZE=2048
press: ctrl o Enter and ctrl x
enable the swap file with its new size:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
----------
Install Required Dependencies:

apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
and
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
----------
Install bitcoin PPA files for the compiling process:

cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
paste to following line:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
press: ctrl o Enter and ctrl x
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
----------
Install working libssl:

cd && sudo apt-get remove libssl-dev
sudo nano /etc/apt/sources.list
change stretch to jessie
press: ctrl o Enter and ctrl x
sudo apt-get update
sudo apt-get install libssl-dev
sudo apt-mark hold libssl-dev
sudo apt-mark hold libssl1.0.0
sudo nano /etc/apt/sources.list
Change jessie" back to stretch
press: ctrl o Enter and ctrl x
sudo apt-get update
----------

Compile and Install BerkeleyDB 4.8.30 :

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
sudo ../dist/configure --enable-cxx
sudo make
sudo make install
export CPATH="/uslocal/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib"
----------

The wallet:

(my way) mkdir wallets , cd wallets
git clone https://github.com/RGPickles/BankSocietyCoin
cd BankSocietyCoin
chmod 755 src/leveldb/build_detect_platform
chmod 755 src/secp256k1/autogen.sh
cd src/
make -f makefile.unix
./societyd
* for qt wallet*
cd ..
qmake
make
edit society.conf in .society
(rpcuser=SomeCoolRandomUsername
rpcpassword=SOMETHINawesomeYOUdontHaveToRemember
rpcconnect=127.0.0.1
save.
./society-qt
----------

Have fun!
for a Beer - Donations ;)
SOCI - Si6V7EwnJqzmFiNGHSbXrtWUXKH6F4EFm3
BTC - 1HpGF4wMzztpJ4KT4o2ySFvnLJ4gCoYaV5
LTC - LS22MgY9G4KbaKhkR5dFi995MbcQhuyDXW
ETH - 0x6b5EdC3e58Fd84a40aa942964690adA91C398075
TRX - TKBpktt5QQ9WV57QjonQrGr1vmKLCVQBL6

13.07.2019 DennisHilk




**********
if error (makefile.unix:200: obj/rpcclient.o] appears)
[This first step is necessary because you will get linking errors if you don't remove the old Boost library]
sudo apt remove --purge --auto-remove libboost-dev libboost-thread-dev libboost-system-dev libboost-atomic-dev libboost-regex-dev libboost-chrono-dev
mkdir boost
cd boost
wget https://dl.bintray.com/boostorg/release/1.64.0/source/boost_1_64_0.tar.gz
tar xfz boost_1_64_0.tar.gz (can take rly long, dont worry)
cd boost_1_64_0/
./bootstrap.sh
./b2 stage threading=multi link=static --with-thread --with-system
sudo ./b2 install threading=multi link=static --with-thread --with-system
cd ../../
nano .bash_profile
export LIBS="-L/home/YOURS/boost/boost_1_64_0/stage/lib"
export CPPFLAGS="-I/home/YOURS/boost/boost_1_64_0"
cd society root
make clean
cd src
sudo make -f makefile.unix

(if bignum error)
sudo apt-get install libgmp-dev
or delete opensll and reinstall as above.
submitted by dennishilk to u/dennishilk [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Ravencoin Open Developer Meeting - 2/15/2019

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:02 PM
Hello everybody!

theking - Last Friday at 2:02 PM

Seems likes it’s been so long since this meeting was held. At least a month 📷

Tron - Last Friday at 2:02 PM

Hi all!!!

Tom - Last Friday at 2:02 PM

Big boss is here !(edited)

BigZim - Last Friday at 2:03 PM

Oh hi

theking - Last Friday at 2:04 PM

Hi @Tron

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:04 PM

Topics for today: Release 2.2.2, Mobile Wallet, Restricted Assets, SLC Raven Meetup📷1

truedev - Last Friday at 2:05 PM

hello

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:05 PM

Release 2.2.2 GO

J. | ravenland.org - Last Friday at 2:05 PM

Hey

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:05 PM

BTW, blondfrogs won't be able to join us today. 📷

corby - Last Friday at 2:05 PM

Hi all

Chatturga - Last Friday at 2:05 PM

Blondefrogs has been working on the 2.2.2 update. He isnt here today, but he left this tidbit for the meeting:(edited)"Release 2.2.2 has a bunch of new updates. The sync speed fix that was released in 2.2.1 has been updated even more to use less memory/ram and uses less CPU. Each node used to hold all addresses that contained an asset as well as the amount in those addresses. That is now optional with the -assetindex flag. Which can be put into the raven.conf or added as a parameter when starting the wallet. Some other wallet issues were also fixed with this memory update. This is considered an mandatory update, especially if you haven't updated to 2.2.1 which resolved a potential fork bug fix. I would still suggest updating to 2.2.2 even if you are on 2.2.1."📷6

Jeroz - Last Friday at 2:07 PM

wen source?📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:07 PM

There's a PR that was just moved to Develop.When is now

Jeroz - Last Friday at 2:08 PM

great 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:08 PM

It'll be merged by the devs to master and then binaries should be posted soon

truedev - Last Friday at 2:09 PM

any idea when dividends will be functional?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:09 PM

A bunch of testing has been happening and is currently running on the seed-nodes.

Tron - Last Friday at 2:10 PM

No timeline for dividends, but it is the one function that doesn't need any changes to consensus. And it can be done on tier 2 with a python script. The plan is still to build in a rpc call.📷2

truedev - Last Friday at 2:11 PM

alright

SpyderDev - Last Friday at 2:12 PM

We have been focusing on sync performance and have been running many tests. I've added an image of the results of this testing. Currently we still want to work on getting the Windows QT sync times faster (at least closer to what they are using just ravend). Overall we are very happy with the speeds and hope it will help people that have struggled getting their nodes up to date.(edited)📷

Jeroz - Last Friday at 2:13 PM

Yeah that table completely puzzled me

[Master] Roshii - Last Friday at 2:13 PM

hello!📷6

Jeroz - Last Friday at 2:13 PM

Fast branch is 2.2.1? or 2.2.2? Develop branch is 2.2.0?

SpyderDev - Last Friday at 2:15 PM

Sorry, should have clarified that. I was testing while it was still under development. On the table the top is the new-sync code, the bottom is the old "assets" release. As of about 5 minutes ago all of this code is on the develop branch.

Jeroz - Last Friday at 2:15 PM

Although syncing is mostly bottlenecked by cpu speed, that 16 core windows-qt still looks off to me. I synced windows Qt using 2.2.2 in ~2h on a i5-7600K.ok

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:17 PM

Okay, we good to move to the Mobile update?

SpyderDev - Last Friday at 2:17 PM

The Windows box is an AWS instance and there is some concern that the remote desktop could be slowing the QT UI down causing the horrible sync times. I am working on getting a local Windows 10 resource and will have updated information once that is ready (early next week).

Jeroz - Last Friday at 2:18 PM

ah that might explain. Ubuntu qt was 45 mins for me

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:18 PM

CoolOkay, Mobile!Go!

[Master] Roshii - Last Friday at 2:18 PM

📷📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:19 PM

@[Master] Roshii has been working closely with some of the other devs to get the iOS version out the door.Android will follow closely.

Jeroz - Last Friday at 2:20 PM

is android an easy port?

J. | ravenland.org - Last Friday at 2:20 PM

Usually its the case(?), i mean easier 📷(edited)

SpyderDev - Last Friday at 2:20 PM

Just copy and paste right Roshii 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:20 PM

LOLNo, usually its a completely new development effort.For the RVN Wallets they are both written in native iOS/Android code.

[Master] Roshii - Last Friday at 2:21 PM

So the iOS and Android use the same Core SPV module written in C, and it's the most difficult part.I have already did some work when it comes to Android, and it's 70% finishedHave also to port all the changes we lately did to the iOS wallet ...

boatsandhoes - Last Friday at 2:21 PM

yeah, unfortunately its not as easy as cut and paste for ios to android

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:21 PM

Anybody interested in installing the TestFlight version and helping us test?

boatsandhoes - Last Friday at 2:22 PM

yes

J. | ravenland.org - Last Friday at 2:22 PM

For android? sure.

BW__ - Last Friday at 2:22 PM

Android? yes.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

I'll talk to Apple about adding Android support to TestFlight.Might be a while.

J. | ravenland.org - Last Friday at 2:22 PM

lol

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

Anybody on here using iOS?

Jeroz - Last Friday at 2:22 PM

Yeh me

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:22 PM

besides me...

[Master] Roshii - Last Friday at 2:23 PM

Android is very close, fortunately I'll have enough coffee in Morocco to finish the wallet in two weeks.(edited)📷4📷5

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:23 PM

https://testflight.apple.com/join/NTVQ2FfY (400 installs available)Join the RVN Wallet betaAvailable on iOS📷

theking - Last Friday at 2:23 PM

I will test iOS if needed

[Master] Roshii - Last Friday at 2:23 PM

@shiny

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:24 PM

Some of the devs have been doing a bunch of testing on iOS but we would love others to help.Bugs can be reported on GitHubhttps://github.com/RavenProject/ravenwallet-iosGitHubRavenProject/ravenwallet-iosContribute to RavenProject/ravenwallet-ios development by creating an account on GitHub.📷

truedev - Last Friday at 2:25 PM

how confident are you that apple will allow it on the appstore

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:25 PM

It's already in the App store.

truedev - Last Friday at 2:25 PM

ok

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:25 PM

That wasn't easy though.

truedev - Last Friday at 2:26 PM

yah figured, a lot of coins have been completely rejected(edited)

Chatturga - Last Friday at 2:26 PM

The devs already jumped through Apples 152,315 flaming hoops to get it in there.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:26 PM

Yup, many meetings and phone calls.

J. | ravenland.org - Last Friday at 2:26 PM

wen rvn modular phone

Jeroz - Last Friday at 2:27 PM

Looking good📷📷7

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:28 PM

Okay, any questions about iOS release?

jaysonb - Last Friday at 2:28 PM

seed word format changed? i seem to have to have same words. did i need to delete and install fresh?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:29 PM

No, it used your old ones.Always have your 12 words. especially when testing.

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:30 PM

I’ve got iOS

Tron - Last Friday at 2:30 PM

If you use your 12-words, and then sync, and you're missing funds. Go here: https://medium.com/@tronblack/ravencoin-testing-ios-wallet-b713deb2c800MediumRavencoin — Testing iOS Wallet – Tron Black – MediumThank you for helping us test the Ravencoin iOS mobile wallet. Since you are in an early group of testers, you might have used the…

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:30 PM

Sweet, install and report bugs.

Tron - Last Friday at 2:30 PM

Or just go there...

jaysonb - Last Friday at 2:30 PM

that article scared me so i moved everything off.but i'll put some back on now

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:31 PM

📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:31 PM

That's unfortunate. You don't need to be scared ever if you have your 12 words.

[Master] Roshii - Last Friday at 2:31 PM

android current state(edited)📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:32 PM

Here's the install link one more time for those that have joined late: https://testflight.apple.com/join/NTVQ2FfYJoin the RVN Wallet betaAvailable on iOS📷Okay, Tron's topic: Restricted Tokens

Tron - Last Friday at 2:33 PM

I have an idea.(edited)📷7📷6

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:34 PM

That several other devs have helped with. 📷

Tron - Last Friday at 2:34 PM

📷

SpyderDev - Last Friday at 2:34 PM

and lawyers

Tron - Last Friday at 2:34 PM

When the project started, ICOs were the big thing. Now it is STOsThe main difference is the legal wrapping and rules around securities.If Ravencoin has two more token types (Tags and Restricted Assets), there are lots of ways to make compliant tokens.Importantly, it doesn't affect the existing tokens at all.Tags - Tokens that can be sent only by the issuer once (with metadata).These tokens start with (hashtag)(edited)📷8

SpyderDev - Last Friday at 2:37 PM

^(octothorpe)

Tron - Last Friday at 2:37 PM

The Restricted Assets start with $, and can be frozen by the issuer. But they only move between tagged addresses.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:38 PM

Tags can be sent to a user's address after the issuer has done the necessary due diligence for an STO issuance.(edited)

Tron - Last Friday at 2:38 PM

The issuer determines which tags the Restricted Asset will honor.This can be used for lots of different use cases.

EEE - Last Friday at 2:38 PM

Stunning interface guys

boatsandhoes - Last Friday at 2:39 PM

will that determination be a setting in the wallet?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:39 PM

Restricted assets can then only be sent to addresses that are allowed and have the proper Tags.

boatsandhoes - Last Friday at 2:39 PM

interesting📷1

J. | ravenland.org - Last Friday at 2:39 PM

Did you guys get contacted by some entity* whos forcing the restricted address policy? or is this done as precautionary measure? At first glance your idea sounds good Tron.(edited)

Tron - Last Friday at 2:39 PM

Example: $UBER token only moves among addresses tagged with #KYC

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:40 PM

So Ravenland will have to buy a bunch more spam tokens.📷4

SpyderDev - Last Friday at 2:40 PM

#ravenland.

boatsandhoes - Last Friday at 2:40 PM

so is the $ something that can be added to an existing asset?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:40 PM

It's not a forced thing. But adding the ability for Raven to be used in new use cases where legal requirements exist.

Tron - Last Friday at 2:40 PM

Not contacted by anyone, and not precautionary. Ravencoin Assets are just tools. This is just another tool that will help issuers of security tokens.📷9📷4

BW__ - Last Friday at 2:41 PM

Love it.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:41 PM

It'll be a new token type that you can create @boatsandhoes📷1

ravencoin maximalist 🧘🏻♂ - Last Friday at 2:41 PM

That sounds awesome

SpyderDev - Last Friday at 2:41 PM

I for one am very excited about this...📷4

Hans_Schmidt - Last Friday at 2:41 PM

How does the $ token owner specify the required # tags?

DeejayQQ - Last Friday at 2:41 PM

Can the same name have different token type?Sorry need time to digest

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:42 PM

Still working out the details. Tron will be posting additional info about the idea soon.

Steelers - Last Friday at 2:42 PM

Cool

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:42 PM

Feedback is wanted!

Tron - Last Friday at 2:42 PM

Q: Was this originally the plan for Ravencoin? A: No. This is in response to the regulatory ramp up in 2018 in some jurisdictions which requires that only known individuals or entities to operate peer-to-peer on certain tokens. For jurisdictions that allow unrestricted peer-to-peer transfer, we strongly encourage use of the original Ravencoin assets. The Restricted Assets are an adaptation to satisfy burdensome, privacy-destroying regulations, with a goal of reducing information replication which makes Ravencoin Restricted Assets a better alternative to those being promoted now.

jaysonb - Last Friday at 2:43 PM

all nodes will validate the transactions not just those interested in the transaction - i assume all will validate..

boatsandhoes - Last Friday at 2:43 PM

so essentially any name already secured in the hopes of having that functionality are worth less because they wont be able to?

theking - Last Friday at 2:44 PM

Can the restricted assets be time based in any way? For instance, in some STO regulated environment, there is a lockup for some period of time after issuance, but then after a certain period of time the restriction goes away and the securities can be traded. Is that contemplated at all?

DeejayQQ - Last Friday at 2:44 PM

If I already have Tron as my asset, there could be another Tron but under a different token type such as restricted assets?

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:44 PM

Yes all nodes will do consensus checks.

corby - Last Friday at 2:44 PM

@boatsandhoes there's going to be a grace period where you can purchase $XXX if you own XXXon the order of months

boatsandhoes - Last Friday at 2:45 PM

📷 📷 📷 📷

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:45 PM

Yes, you have the TRON asset and you can also have the $TRON asset.(edited)

Tron - Last Friday at 2:45 PM

Regarding the lockup....

boatsandhoes - Last Friday at 2:45 PM

how many RVN for that?

Tron - Last Friday at 2:45 PM

Rule 144 under the Securities Act of 1933 This is an important rule to be aware of in terms of privately held securities. This rule provides the most commonly used exemption for holders to sell restricted securities (Note: For context, a restricted security is a security sold in an exempt offering, except for Reg A+). The general idea is that you can publicly resell your “restricted” (privately sold) securities only when the restricted legend is removed. The solution Ravencoin Restricted Assets provides is the ability for the Iissuer to Freeze the asset ininto the holders account. The qty will be visible, and the frozen status will be visible. The meta-data for a Freeze can specify 144_Restricted. The issuer can Unfreeze to release the 144 restriction.Similar for Reg D 1-year lockup.@theking

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

@theking ^^

DeejayQQ - Last Friday at 2:46 PM

What is the timeline for this restricted asset to be implemented?📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

No timelines yetStill in the ideation phase.

SpyderDev - Last Friday at 2:46 PM

Fresh off the press...

DeejayQQ - Last Friday at 2:46 PM

Ok, idea for nowGot it

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:46 PM

Wanting input for the idea.

boatsandhoes - Last Friday at 2:47 PM

a preset for lock up settings would be nice

Jeroz - Last Friday at 2:47 PM

What about the ability to move an asset from restricted to unrestricted after grace period similar to the reissue ability? By the issuer(edited)

boatsandhoes - Last Friday at 2:47 PM

adjustable preset*

DeejayQQ - Last Friday at 2:48 PM

If this restricted assets would help underlying token listed on exchanges for trading by satisfying the legal requirements, I don’t see why not. There are only benefits📷2

boatsandhoes - Last Friday at 2:48 PM

yeah, win win

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:48 PM

There is something similar in vote tokens.

corby - Last Friday at 2:48 PM

@Jeroz the issuer would be able to "reissue" and relax restrictions

DeejayQQ - Last Friday at 2:48 PM

Just throwing things out here. Can we just make all existing tokens crested so far restricted assets?*created

boatsandhoes - Last Friday at 2:49 PM

stupid question, is it possible to have burned rvn cost for the $ to add onto the block reward as a bonus?(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:49 PM

No, @DeejayQQ there should be both usecases available in the platform.

corby - Last Friday at 2:49 PM

We (my dog and I) are envisioning a differentiated space where we can charge a lot more RVN to keep non-serious people out..(edited)

Tron - Last Friday at 2:49 PM

@Jeroz Yes, as long as the asset is still "reissuable", you could change the logic from (#KYC & #ACCREDITED) to just #KYC📷3

Jeroz - Last Friday at 2:49 PM

I'm just worrying about the name uniqueness if you can have #BANANA and $BANANA

BW__ - Last Friday at 2:50 PM

Is it fair to assume that tags can be standardized for specific purposes? If so, should we create something akin to an 'ERC' in git repo?

Jeroz - Last Friday at 2:50 PM

@Tron sounds cool

truedev - Last Friday at 2:50 PM

honestly, I think you should be able to buy/create an asset in a set, with all types(edited)

boatsandhoes - Last Friday at 2:50 PM

^that part

Hans_Schmidt - Last Friday at 2:51 PM

Since the #KYC tag is just locked to an address, what prevents someone from selling their address and thereby the KYC?

corby - Last Friday at 2:51 PM

The "#" types won't trade -- they're just stamps to stamp addresses as qualified-to-hold-some-stuff..

Tron - Last Friday at 2:51 PM

The tags are created by the users. The system is still jurisidiction agnostic.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:51 PM

@Hans_Schmidt nothing really, the same thing as selling your username password to any other existing financial app account.

corby - Last Friday at 2:51 PM

@Hans_Schmidt Real world networks, high cost of entry (for serious applications)For non-serious applications, nothing

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:51 PM

You still have the liability associated with that account though.

Jeroz - Last Friday at 2:52 PM

@corby what about BANANA/ vs $BANANA/ ?Or do you want to make them subassets?

boatsandhoes - Last Friday at 2:52 PM

@Jeroz better safe than sorry, just swoop both

Tron - Last Friday at 2:52 PM

A country could require that #SOMECOUNTRY tag has to exist before moving $SPECIALASSET to an address. The users set the rules. #KYC was just an example because it is an industry problem at the moment.

corby - Last Friday at 2:52 PM

#BANANA, $BANANA, TRICYCLE, and BANANA can all coexist just fine I think..

theking - Last Friday at 2:53 PM

Thanks @Tron. This is great and I think something that will enable raven to become an even more widely used platform.📷4

Tron - Last Friday at 2:53 PM

That's the hope. I think it solves some real problems that the industry is trying to solve through incompatible ERC-20 experiments.📷3

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:54 PM

/hacks📷3

boatsandhoes - Last Friday at 2:54 PM

what is the purposed cost for $ in addition to an existing asset?

corby - Last Friday at 2:54 PM

People that own #THESE I am calling "Qualifiers" -- they just stamp their mark on addresses. Issuers of $THESE need to establish trust with #THESE and #THOSE and then decide what restrictions to apply.📷1

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:54 PM

5 mins left. Stay on this topic or switch to meetup?

Tron - Last Friday at 2:55 PM

@boatsandhoes Not determined.

Jeroz - Last Friday at 2:55 PM

yeah the idea is a nice proof of ownership / membership

DeejayQQ - Last Friday at 2:55 PM

Meetup

Chatturga - Last Friday at 2:55 PM

TL;DR - The SLC meetup is in 1 month. Go to https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ to indicate if you plan on attending so that we have a somewhat accurate headcount.MeetupSalt Lake City Ravencoin (Salt Lake City, UT)Ravencoin is a blockchain and platform optimized for transferring assets, such as tokens, from one holder to another, and is built on a fork of the Bitcoin code. It is intended to prioritize security,📷

corby - Last Friday at 2:55 PM

@boatsandhoes One Million Raven

Chatturga - Last Friday at 2:55 PM

Punch and pie

J. | ravenland.org - Last Friday at 2:56 PM

Can the SLC meetup made interactive for people that cant make it there?

theking - Last Friday at 2:56 PM

What about having just one name ( you first buy the standard raven token under whatever name you like) and then the holder of the owner token is the only one to create restricted tokens ? Might be some way to ensure no name confusion.📷4

boatsandhoes - Last Friday at 2:56 PM

what about that block reward bonus concept for purchasing $. would that work?

Chatturga - Last Friday at 2:56 PM

I dont know that we have the ability to make it interactive as far as Q&A goes, but I'll look into it. We should have it live streaming. @J. | ravenland.org(edited)📷2

BW__ - Last Friday at 2:56 PM

@Tron Is there same kind of logic layer to restricted assets?(edited)

Tron - Last Friday at 2:57 PM

@theking I like that idea.

Jeroz - Last Friday at 2:57 PM

Quick question that is offtopic but I think deserves an answer because it was asked a couple of times earlier this week: Will unique assets get a reissuable function? To change IPFS.(edited)📷2

Tron - Last Friday at 2:57 PM

@BW__ Yes. Simple and, or, not and parenthesis - limited in length.(edited)

boatsandhoes - Last Friday at 2:57 PM

@theking thats a good idea

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:58 PM

@Jeroz There is not a way to do that currently.

BW__ - Last Friday at 2:58 PM

@Tron That makes sense. Thank you.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 2:58 PM

Just make sure your changes to the information have the same hash as the previous data and your golden. 📷📷1

Jeroz - Last Friday at 2:59 PM

Any plans on changing that, perhaps when introducing new types of assets?

boatsandhoes - Last Friday at 2:59 PM

i like that it cant be changed

corby - Last Friday at 3:00 PM

Thanks everyone!

theking - Last Friday at 3:00 PM

@Tron there was some info floating around about a 2nd later KYC solution ( from your recent podcast w Crypto Koala). Is that a separate solution someone is working on or part of this new concept?📷1

Tron - Last Friday at 3:01 PM

Starting with the introduction of messaging, every transaction can have an IPFS hash. Can be used as an public invoice, details about the transaction, etc.@theking The same new concept.

[Master] Roshii - Last Friday at 3:02 PM

Ok, we're done.

Steelers - Last Friday at 3:02 PM

How would Raven handle for instance a stock split?

BW__ - Last Friday at 3:02 PM

Are there sync concerns if a restricted asset logic layer is added?

Tron - Last Friday at 3:02 PM

@theking The KYC provider would store the KYC info, and send the Tag to an address with meta data that specifies that they're holding the KYC data. The KYC data would not be public, but could be audited.

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 3:02 PM

That way you could update information about the original unique asset with each transaction.@Steelers Just a simple re-issue of the asset

Tron - Last Friday at 3:03 PM

@bw_ The logic layer is only a small db that stores the meta-data about the Restricted Asset, and enforces the restriction in the consensus rules. Rule returns true/false.(edited)

RavencoinDev (Jesse/Wolfsokta) - Last Friday at 3:03 PM

Thanks everybody! I have to run.

Jeroz - Last Friday at 3:04 PM

I'm looking forward to the discussions to let this take shape. Thanks all! 📷📷4

Tron - Last Friday at 3:05 PM

@BW__ It would work very similarly to the way the units works now. Each asset has number of units and any transaction that makes it too granular (more satoshis) will fail in consensus -- even if it gets past the RPC checks.Signing off. Thanks all!!!📷9📷4📷9
submitted by Chatturga to Ravencoin [link] [comments]

BTCPay Server + EPS + RTL - how?

I am trying to build a box with: - Linux Ubuntu 18.04 - BTCPay Server, using docker - EPS (Electrum Personal Server) - RTL (Ride the lightning)
I have the full bitcoin data synced in a folder already, from a previous bitcoin-qt/bitcoind instance.
  1. Can I install BTCPay Server with docker and then run beside another docker with EPS?
  2. I understand that RTL is already integrated into BTCPay, so I just have to update the server and activate it?
  3. Is possible to integrate also EPS into the BTCPay docker file, after the installation? Or is it in "works" to be integrated in the same docker installation/update server by BTCPay ?
  4. Is possible to run EPS without docker, but using the bitcoind from BTCPay docker instance?
  5. Is possible to connect a mobile wallet (ex. Samourai) to that bitcoind instance from BTCPay Server ?
  6. One last question: is there a procedure to backup all the BTCPay server settings, for in case of disaster recovery moment? So to restore all data at once after reinstall OS ?
This is very important thing, if I start to put a BTCPay server at work in production and the machine gets fucked, how easy is to restore it?
Please somebody can respond to these questions, not in a super technical manner so many others can understand it?
Maybe u/belcher_ and u/CardCollector1 or u/NicolasDorier can help with some answers here, please?
EDIT: I hope I don't have to add a meme to this post to bring more attention... seems that lately only memes are "important" here, subjects like this are ignored. EDIT2: 21 hours and still not any answer... fuck, nobody uses BTCPay ?
submitted by Mr--Robot to Bitcoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

BU - "Bitcoin Cash" edition - Ubuntu PPA repo Update to ver 1.2.0.0

The Ubuntu PPA repository will serve BUcash version 1.2.0.0 is available at:
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
This release among other things implements the new CashAddr address format.
See the release notes for more details.
To add this repo to your system just execute these commands:
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
The repository supports these Ubuntu version:
And these archs:
 
(#) due to spectre/meltdown bug currently arm64 and arm32 builds are disabled by ubuntu launchpad buildfarm
submitted by s1ckpig to btc [link] [comments]

[Reupload][Tutorial] Install Armory Wallet 0.96.4 on Fedora Workstation 29

note: I had to reupload this because reddit is banning my original account for no reason. I appealed but I thought maybe someone wanted to have this content online.
Armory is a very cool open source bitcoin wallet for the power user. You can do neat things with it, read here: https://www.bitcoinarmory.com/
Disclaimer: follow these steps at your own risk. I am not responsible for any damage / loss of funds you might face for following or not following correctly my instructions here. I may have made a typo somewhere or be wrong so do your own research and learn for yourself what I am doing at each step, and what consequences may have for you, at your own risk. These instructions may be wrong somewhere. It worked for me, it doesn't mean it has to work for you.
Requirements for this tutorial:
We are going to build the code from source.
Install dependencies.
I followed these instructions to find the equivalent Fedora packages:
Open the terminal app and run this command:
sudo dnf install git nano qt qt-devel python-devel libtool pyqt4 pyqt4-devel lmdb swig 
And more python packages that I had to install:
sudo pip install twisted qt4reactor psutil 
Importing the signing key to verify the software
Install KGPG to easily manage keys.
sudo dnf install kgpg 
Go to
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0x8C5211764922589A
and copy paste the code below the title from
-----BEGIN PGP PUBLIC KEY BLOCK-----
to
-----END PGP PUBLIC KEY BLOCK-----
both included. Then open KGPG from terminal with
kgpg -k 
and click 'Import Key...' > Clipboard > Ok . You should see a confirmation message. Double check the info and close the dialog.
Repeat the process with this other key:
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4FC919E85C595BA
You can verify both keys are mentioned at the Armory webpage.
Clone and compile the code plus some edits
Before, we installed some dependencies that are named differently than the equivalent Ubuntu/Debian package specified at the Armory documentation. The build process fails for Fedora as the name for the dependency during checks won't match the Fedora version. There's this pull request addressing that, but the code is not part of any release yet.
So the fastest workaround (maybe a bit dirty) was to edit the build config file and correct the name for my Fedora install. Let's begin.
Clone the Armory repository
git clone https://github.com/goatpig/BitcoinArmory.git 
Enter the BitcoinArmory dir
cd BitcoinArmory 
Switch to release code
git checkout 'v0.96.4' 
Verify commit signature
git tag -v 'v0.96.4' 
you should see the following message:
> object fee1f91a3137ef1056e15cc606a186b0e508f84c > type commit > tag v0.96.4 > tagger goatpig  1522530739 +0200 > > v0.96.4 > gpg: Signature made Sat 31 Mar 2018 11:12:19 PM CEST > gpg: using RSA key 8C5211764922589A > gpg: Good signature from "goatpig (Offline signing key for Armory releases) " > gpg: WARNING: This key is not certified with a trusted signature! > gpg: There is no indication that the signature belongs to the owner. > Primary key fingerprint: 745D 707F BA53 968B DF63 AA8D 8C52 1176 4922 589A 
if it looks the same, everything is ok.
Edit the file 'Makefile' file with
gedit Makefile 
And click the three dot menu > Find and Replace...
Configure the options as follows:
https://i.imgur.com/hpS01Kd.png
Click Replace All and close.
Go back to the terminal and run the following commands in order from inside the BitcoinArmory dir. Wait for the previous one to finish before running the next one:
./autogen.sh 
...
./configure 
...
make 
if everything finishes without error you are all done! Run this to start Armory:
python ./ArmoryQt.py 
you are all set. Please let me know if I missed something.
submitted by RedditShadowbangedMe to Bitcoin [link] [comments]

[Tutorial] Install Armory Wallet 0.96.4 on Fedora Workstation 29

Armory is a very cool open source bitcoin wallet for the power user. You can do neat things with it, read here: https://www.bitcoinarmory.com/
Disclaimer: follow these steps at your own risk. I am not responsible for any damage / loss of funds you might face for following or not following correctly my instructions here. I may have made a typo somewhere or be wrong so do your own research and learn for yourself what I am doing at each step, and what consequences may have for you, at your own risk. These instructions may be wrong somewhere. It worked for me, it doesn't mean it has to work for you.
Requirements for this tutorial:
We are going to build the code from source.
Install dependencies.
I followed these instructions to find the equivalent Fedora packages:
Open the terminal app and run this command:
sudo dnf install git nano qt qt-devel python-devel libtool pyqt4 pyqt4-devel lmdb swig 
And more python packages that I had to install:
sudo pip install twisted qt4reactor psutil 
Importing the signing key to verify the software
Install KGPG to easily manage keys.
sudo dnf install kgpg 
Go to
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0x8C5211764922589A
and copy paste the code below the title from
-----BEGIN PGP PUBLIC KEY BLOCK-----
to
-----END PGP PUBLIC KEY BLOCK-----
both included. Then open KGPG from terminal with
kgpg -k 
and click 'Import Key...' > Clipboard > Ok . You should see a confirmation message. Double check the info and close the dialog.
Repeat the process with this other key:
https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4FC919E85C595BA
You can verify both keys are mentioned at the Armory webpage.
Clone and compile the code plus some edits
Before, we installed some dependencies that are named differently than the equivalent Ubuntu/Debian package specified at the Armory documentation. The build process fails for Fedora as the name for the dependency during checks won't match the Fedora version. There's this pull request addressing that, but the code is not part of any release yet.
So the fastest workaround (maybe a bit dirty) was to edit the build config file and correct the name for my Fedora install. Let's begin.
Clone the Armory repository
git clone https://github.com/goatpig/BitcoinArmory.git 
Enter the BitcoinArmory dir
cd BitcoinArmory 
Switch to release code
git checkout 'v0.96.4' 
Verify commit signature
git tag -v 'v0.96.4' 
you should see the following message:
> object fee1f91a3137ef1056e15cc606a186b0e508f84c > type commit > tag v0.96.4 > tagger goatpig  1522530739 +0200 > > v0.96.4 > gpg: Signature made Sat 31 Mar 2018 11:12:19 PM CEST > gpg: using RSA key 8C5211764922589A > gpg: Good signature from "goatpig (Offline signing key for Armory releases) " > gpg: WARNING: This key is not certified with a trusted signature! > gpg: There is no indication that the signature belongs to the owner. > Primary key fingerprint: 745D 707F BA53 968B DF63 AA8D 8C52 1176 4922 589A 
if it looks the same, everything is ok.
Edit the file 'Makefile' file with
gedit Makefile 
And click the three dot menu > Find and Replace...
Configure the options as follows:
https://i.imgur.com/hpS01Kd.png
Click Replace All and close.
Go back to the terminal and run the following commands in order from inside the BitcoinArmory dir. Wait for the previous one to finish before running the next one:
./autogen.sh 
...
./configure 
...
make 
if everything finishes without error you are all done! Run this to start Armory:
python ./ArmoryQt.py 
you are all set. Please let me know if I missed something.
edit: cd git dir.
submitted by AmbitiousSpeed0 to Bitcoin [link] [comments]

How To Build/Run a Bitcoin Node on Linux Bitcoin Mining on Ubuntu Ubuntu -1 Setting up Bitcoin 4. Installing Bitcoin Core on Linux [Streamed] - Compiling a Bitcoin Wallet for Windows

Under the bitcoin/doc directory is a file called build-unix.md containing more Linux build instructions and options. Run Bitcoin Core. Bitcoin Core can now be run from the command line. $ src/qt/bitcoin-qt The Bitcoin Core welcome screen. Running this command should bring up the Bitcoin Core welcome screen. Alternatively, Bitcoin can be run Install ISO image to USB or CD. Follow Ubuntu’s official tutorial for Windows or macOS. Install the OS. $ sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils python3 called bitcoin-qt, then we’ll exit it and run the non-GUI version called bitcoind, This PR allows Bitcoin Core to be relatively easily built with Visual Studio 2017. It's anticipated that it could be useful for devs familiar with Visual Studio and Microsoft's tooling. In particular the ability to use the VS debugger is a big benefit. Caveats: There are some minor code changes required on Bitcoin Core in order for msvc to be able to successfully compile. Next, update Ubuntu’s software package lists: $ sudo apt-get update Finally, install Bitcoin core itself. Enter “Y” when asked asked for permission to continue: $ sudo apt-get install bitcoin-qt This last command may take some time, during which both Bitcoin Core and all of its dependencies will be installed. Run Bitcoin Core In this post, I will explain how to compile bitcoin source code on Ubuntu 16.04 LTS. I will be running my Ubuntu instance on AWS though you can follow the same instructions anywhere on Ubuntu 16.04 LTS. Please make sure your server has at least 4 GB of RAM.

[index] [30727] [11909] [21315] [221] [19312] [17829] [19556] [7519] [5783] [12010]

How To Build/Run a Bitcoin Node on Linux

This short video shows how to compile the bitcoin source code on linux (ubunu). an easy task to do but it take some time (around 15 min) please read the instruction in the official github https ... BitCoin mining on Ubuntu using specialized ASIC procesors and Ubuntu software such as: CGMiner, BFGMiner, EasyMiner https://linuxhint.com/best-usb-bitcoin-mi... Today we are going to compile the latest Bitcoin wallet for Windows Windows 10 has an Ubuntu 16.04 Terminal app in the Microsoft Store that we use to comp... install qt creator ubuntu command line ubuntu install bitcoin qt install qt sdk ubuntu install qt 5.2 ubuntu install litecoin qt ubuntu install qt 4.7 ubuntu install phonon qt ubuntu uninstall qt ... How to install Bitcoin on Ubuntu 16.04 On this video, I will show you how to install Bitcoin on Ubuntu 16.04 Commands sudo apt-add-repository ppa:bitcoin/bitcoin sudo apt-get update “sudo apt ...

Flag Counter